Although the structure of the injection mould design and performance due to the variety of plastic, shape and type of plastics injection molding machine structure and the like may be different and changing, but the basic structure is the same.
2014年3月25日星期二
MASTER injection mold maker of temperature control system to control the mold temperature
Preparation conditions of temperature control system control mold temperature, mold temperature machine, the MASTER plastic container molding heat transfer fluid is composed of three parts. In order to ensure that heat can be added to the mold or moved, each part of the system must meet the following conditions: the first is in the mold, cooling channel surface area must be large enough, the ability to channel diameter to match the pump (pump pressure). The temperature distribution in the cavity on the deformation and internal pressure have a great impact. A reasonable set of cooling channel can reduce the internal pressure, so as to improve the quality of injection MASTER plastic mold manufacturerparts. It also can shorten the cycle time, reduce product cost. The second is the mold temperature machine must be able to keep constant temperature heat conducting fluid in the range of 1 ℃ -3 ℃ within, depending on the product quality requirements set. Third is a heat transfer fluid must have good heat conduction ability, the most important is, it must be able to import or export a large amount of heat in theshortest amount of time. From the thermodynamic point of view, the water is more obvious than that of oil well.
订阅:
博文评论 (Atom)
没有评论:
发表评论