Ten Steps to step in the middle of the injection mold design

Injection mold design ten-step process
Step Five: The mold MASTER milk crate mold is fitted to the mold base
Step Six: die-mold base installation and positioning and design
Step Seven: the parting line, pillow bit, inserts design
Step Eight: If the customer to design products are undercut pulling mechanism such as row-bit or slant design
Step 9: Design gating system (direct gate, side gate, diving mouth, horn type, point gate, fan gate, take the gate, etc.)
Step 10: If you want to design a fine nozzle opening and closing the mold with screw plug play
Step 11: exhaust system design (exhaust side slot position and product value overflow size)
Step 12: Ejection MASTER plastic container molding Design (thimble, slant, Division tube, the top block, push plates, gas cap, etc.)
Thirteenth Step: Cooling System Design (waterway styles such as straight-through processing, ladder, partitions, spiral, etc.)
Step XIV: the creation of auxiliary parts (spring, garbage nails, hold the head, the prop department, lock templates, deduction, side locks, balance weights, stopper, hanging die hole, pry the pit, etc.)